Gemmy 37631 Instruction Manual download pdf (Page 2)

5. Plug into receptacle or other

outlet device to inﬂate your

Airblown

Inﬂatable.

6. Once fully inﬂated, clip the

tethers to each of the nylon

loops on the side of the

Airblown

Inﬂatable (See

illustration 3).

7. Insert the tether stakes into the

ground and attach the tethers

(See illustration 4).

8. Locate the nylon Loops on the

bottom of the fabric base and

insert the base stakes through

the nylon loops and into the

ground.

9. To deflate, unplug fan. For

faster deflation, unzip zipper

after unplugging fan. Do not

unplug by pulling on cord.

USER SERVICING INSTRUCTIONS

Lamp Replacement

Disconnect the plug from the electrical outlet and allow the lamp

to cool completely before replacing bulb. Do not touch the bulb

when the power is "ON" as it is extremely hot and make cause

electrocution.

1. Grasp plug and remove from receptacle or other outlet device.

Do not unplug by pulling on the cord.

2. Open the zipper opening on the Airblown

Inﬂatable.

3. Open the protective light cover carefully by pressing down on

the two locking side tabs simultaneously.

4. Replace lamp with same type 7W maximum, candelabra

base, UL classiﬁed.

5. Do not over-tighten the lamp as this may damage the lamp or

lamp holder.

CAUTION

Replace only with same type C7, 7 Watt Max Candelabra-base

120 Volt UL Classiﬁed lamps.

Fuse Replacement

WARNING:

Risk of Fire: Replace only with same size and type of fuse.

WARNING:

Risk of Fire: Do not replace the attachment plug. Contains a

safety device (fuse) that should not be removed. Discard product

if attachment plug is damaged.

1. Grasp plug and remove from the receptacle or other outlet

device. Do not unplug by pulling on

the cord.

2. Open fuse cover. Slide open the fuse

access cover on top of the attachment

plug towards blades. (See illustration)

3. Remove fuse carefully.

4. Replace fuse only with 5 Amp Max,

125 Volt (provided with product).

5. Close the fuse cover. Slide closed

the fuse access cover on top of the

attachment plug.

CAUTION

Do not connect to another lighting string, decorative outﬁt, or

seasonal product. To reduce the risk of ﬁre do not deliberately

illustration 4

reposition either lamp holder contact.

Do not attempt to inﬂate your Airblown

Inﬂatable during unusually

strong winds. If it becomes too windy for safe operation, simply

allow your Airblown

Inﬂatable to deﬂate and wait for better

conditions before re-inﬂating.

Protect the electric fan and power cord from direct exposure to

water. This precaution will reduce the risk of electrical shock.

When the temperature is below 14° F (-10° C), the motor may

temporarily stop running. The motor will begin functioning again

higher temperatures.

WARNING

Remove all plastic fasteners and tags. These are part of the

packaging and should be discarded.

This item is not a toy and should be used for decorative purposes

only.

For indoor and outdoor use.

120 V 60 Hz.

TROUBLE SHOOTING CHECKLIST

If your Animated Airblown

Inﬂatable is not inﬂating, the problem

may be:

1. The power source is disabled or the cord may be unplugged.

2. Debris may be lodged in the motor.

3. The zipper may not be securely fastened, sealing the Animated

Airblown

Inﬂatable.

4. The temperature may be below 14° F (-10° C).

NOTE: ONCE FAN IS UNPLUGGED AND STOPS BLOWING,

YOUR Airblown

Inﬂatable WILL DEFLATE.

FREQUENTLY ASKED QUESTIONS

(FAQ’s)

1. Can I continually run my Airblown

Inﬂatable?

Yes, you can run your Airblown

Inﬂatable during the day

and at night. We recommend that you turn off your Airblown

Inﬂatable when leaving the immediate area and when retiring

for the evening. Otherwise, your Airblown

Inﬂatable is

designed to run continually as you see ﬁt.

2 . What happ ens if my Airblown

Inﬂatable becomes torn?

Rips in the Airblown

Inﬂatable can be sewn by hand (no

special thread is required) or taped with clear packing tape.

3. How can I clean my Airblown

Inﬂatable?

Wipe clean with a damp cloth and allow to dry before

storing away. Use mild detergent if necessary.

4 . When I unplug my Airblown

Inﬂa tabl e, it de ﬂat es. Why is

this?

Your Airblown

Inﬂatable will not stay inﬂated unless it is

plugged in and the fan is blowing air.

5. How much electricity does an Airblown

Inﬂatable consume?

It uses about as much energy as a standard string of holiday

lights.

6. What is the best way to store my Airblown

Inﬂatable?

Store in a bag, box or other storage container and keep in a

cool, dry location.

illustration 3

1 2 3

Comments to this Manuals

No comments

Gemmy 37631 Instruction Manual Page 2

Comments to this Manuals

Related products and manuals for Unknown Gemmy 37631